When the XMAX Riggo light is flashing, it generally indicates an error or operational issue. Here's a troubleshooting guide based on common causes:
1. Low Battery or Charging Issue
1. Low Battery or Charging Issue- Indicator: Light flashes when pressing the power button.
- Solution: Fully charge the device using a high-quality USB-C cable and wall adapter. Avoid using a computer USB port.
2. Connection Issue (Cartridge or Coil)- Indicator: Light flashes repeatedly when trying to activate.
- Cause: Cartridge or coil not making proper contact.
- Solution:
- Remove and reinsert the 510 cartridge or coil.
- Clean the contacts with a cotton swab and isopropyl alcohol.
- Check if the coil or cartridge is damaged or incompatible.
3. Overheat Protection- Indicator: Light flashes rapidly and device doesn’t activate.
- Cause: Device has overheated due to prolonged use.
- Solution: Let it cool down for 5–10 minutes before using again.
4. Short Circuit or Faulty Coil- Indicator: Flashing light immediately after pressing the power button.
- Cause: Coil is shorted or has internal damage.
- Solution:
- Try a different coil or cartridge.
- If issue persists, the device may need servicing.
5. Firmware Glitch- Solution: Perform a reset:
- Turn off the device.
- Leave it idle for 10 minutes.
- Reconnect cartridge/coil and power on.
Comments
0 comments
Please sign in to leave a comment.